6
| OMNIA VOCO® 8 - QUICK START SETUP GUIDE
Headphones
Any input or output (in addition to the four internal mix buses) can be routed to the front panel
headphone jack. Use the knob above the headphone jack to control the volume. To select the feed
to the headphone jack, navigate to the “More…” menu from the main screen. Once in the “More…”
menu, select “Headphone”. Select the input, output, or mix bus that you wish to monitor. Select
“Back” to return to the main screen.
“Settings” Menu
Controls various settings affecting behavior of the front panel display. See Chapter 4 of the manual
for more details.
USB Port
The front panel USB port is primarily used for system software updates, but can also be used with a
USB keyboard for entering preset titles or configuration information. It’s also a handy place to charge
your phone or attach a USB powered light.
Software Updates
Occasionally we may release software updates for the VOCO 8. Visit the Omnia VOCO 8 page at
http://www.telosalliance.com/Omnia/Omnia-Voco-8 to check for the latest version. As of this writing,
the latest software version is 1.15. Once downloaded, place the update file in the root directory of
a FAT16, FAT32, or NTFS formatted USB drive. When the USB drive is connected to the VOCO 8, it
should detect the update file and prompt you to select it for installation. If there are multiple update
files on the USB drive, they will all appear in the list. The default password when prompted (unless
it has been changed) is admin. Do not roll back to an older version unless directed by Telos Alliance
technical support.
