Driving Safety Control
In the «Settings» tab select the «Auxiliary equipment» section from the list.
In the «Accelerometer parameters» section:
“Accelerometer” – enable/disable the use of accelerometer for measuring the vehicle
acceleration. Default value — enabled.
“Accelerometer status” – accelerometer condition. Possible options: not used,
calibration, calibrated, calibration error.
“Accelerometer calibration” – select the accelerometer calibration mode. Possible
options: automatic calibration, manual calibration.
Prior to performing the calibration, firmly fix the terminal and do not change its
position during operation.
Automatic calibration is recommended for vehicles that are operated mainly at speeds
above 50 km/h. Automatic calibration takes between 2 minutes and 24 hours,
depending on the frequency of acceleration and braking on straight sections of the
road.
When selecting manual calibration, in the “Terminal position” field, select one of 24
positions as shown in figure:
48
Operation Parameters Setting
