UTILITY METERING
EISHBOX 426 : PORTABLE BACKUP POWER
Page 2
INTRODUCTION
The Eishbox 426 400W UPS is a light weight, portable, high capacity UPS that uses the latest lithium
battery technology. We provide three output modes: AC wall plug, USB-A adapter, and a direct DC 12V
adapter. The Eishbox 426 will provide you with a backup solution for your home/business to get
through those difficult load shedding hours & unplanned power failures.
WARNING
•
This product has built-in a lithium battery; keep it away from fire. Please consult your local
regulations as to proper disposal of hazardous waste.
•
Make sure the product is protected from moisture and keep it away from water or humid conditions.
•
Do not drop, puncture, or damage this product as it may cause the battery to become unstable.
•
Stop using the product if it smokes or sets on fire while in use. Put out the fire with an extinguisher
immediately to prevent an explosion.
•
Use the product in a well-ventilated area so that the power station
won’t
shut off due to
overheating.
•
Please switch on the product first and choose DC or AC output. Make sure the output indicator light
is on, then begin to use the product to supply power.
•
Before initial use, fully discharge the battery and fully recharge the battery.
NOTICE
The Eishbox 426 can be charged even while on standby mode. The battery is fully charged when it
indicates 12.4V or above. Make sure that the AC switch is off and turn it on only when you need to
use it, otherwise it will drain the battery.