9
POWER CADDY PS
5. PRECAUTIONARY ADVICE
The manufacturer has taken all possible precautions to protect this unit against
overload, over temperature, reverse polarity, etc. If excessive overload, excessive
temperature and/or reverse polarity are applied to the unit, the protection circuit
will work but with excessive mishandling they may give in after a while and this
can cause damage to the unit. It is therefore up to the user to connect the correct
loads and to use the unit within the specified parameters.
The user must also ensure that no reverse power is fed back into the output
sockets of the system.
The unit must not be kept or operated in direct sunlight and should never be
placed in a moist or wet environment.
WARNING !!!
The manufacturer of this unit has taken every care to protect this unit with a
number of built-in protective circuits. If the specification says e.g. 'reverse polarity
protection' or 'short circuit protection' etc. this does not mean that the unit cannot
be damaged. Even though the protection circuits are activated, the unit can still be
damaged under certain conditions, specifically but not only, if the user repeatedly
applies a fault condition.
The protection circuits are there to limit the potential damage caused by reversed
polarity or overloads and to stop a potential fire.
If a protective fuse blows, it is a strong indication that the unit is already damaged,
do not attempt to replace the fuse.
This type of damage is NOT covered by the Warranty. Please return the unit to
your nearest service centre.
Summary of Contents for POWERCADDY PS Series
Page 2: ......
Page 11: ...11 POWER CADDY PS ...
