Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at intlinfo@omnitron-systems.com.
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
OmniConverter
®
10G/Sx
User Manual
Product Overview
The OmniConverter 10G/Sx is an unmanaged compact 10Gigabit Ethernet switch
that features 1/10G SFP/SFP+ uplink ports and four or eight 10/100/1000 RJ-45
copper user ports.
The 10G/Sx functions can be configured using easily accessible DIP-switches
OmniConveter 10G/Sx 6 and 10 Port Modules
Front Panel
The front of the module provides access to the RJ-45 and uplink ports.
RJ-45 and Uplinks Ports
The RJ-45 Ethernet user port supports 10BASE-T, 100BASE-TX and 1000BASE-T
protocols, auto-negotiation, auto MDI/MDI-X crossover and can be manually forced
to a specific speed and duplex mode.
The module supports two 1/10G SFP/SFP+ transceiver uplink ports.
The SFP/SFP+ ports support SERDES 10GBASE-X and 1000BASE-X copper and
fiber transceivers, and SGMII 10/100/1000BASE-T copper transceivers.
Front Panel Layout
Reset Button
A reset button is available on the front of the module to restore the module to factory
default values and clearing buffers and memory . Press and hold the reset button
for more than 5 seconds to restore the module to factory default values.
Page 3
Page 4
