13063030_V_1_0.DOC
11/11
5. OPERATION
For optimum receiving please follow these instructions:
•
Maintain a line-of-sight between the transmitter and receiver antennas, if possible. Avoid placing
transmitter and receiver where metal or other dense materials may be present.
•
Avoid placing the receiver near computers or other RF generating equipment.
IMPORTANT
: Every wireless microphone installation is a unique situation, and can present a variety of
problems. Never attempt a live performance without first conducting a test of the system in the performing
area. If major changes (additional wireless systems or intercoms, relocation of scenery, etc.) have been
made since the last test, check the wireless system again - as close to performance time as possible.
6. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
7. TECHNICAL SPECIFICATIONS
Power supply:
12 - 18 V DC
Frequency range:
470 - 870 MHz
Antenna gain:
1.8 dBi
Booster gain:
10 (-1, +2) dB
Coverage angle:
360°
Antenna input:
BNC
DR-output:
BNC
Dimensions:
76 x 18 x 76 mm
Weight:
140 g
Please note: Every information is subject to change without prior notice. 02.03.2005 ©
