29
7
PROBLEM CHART
This CD player cannot be compared to conventional hi-fi players–even if they have almost the same
appearance. This player is much more rugged in order to withstand the strenuous road use and consistent
transports of mobile discotheques. Vibrations caused by of powerful low frequencies may lead to skipping of
the CD. This CD player is provided with a 40-second anti-shock memory and rubber feet to compensate
shocks or vibrations.
Should you have further problems, please refer to the chart below.
The adjustments of the pitch control change the FM frequencies. Should the display repeatedly show "ERR"
adjust the frequencies.
1. Have the connections correctly been carried out?
2. Is your amplifier and your mixer properly adjusted?
3. Have you kept to all instructions given in this manual?
PROBLEM
POSSIBLE CAUSE
REMEDY
Player does not react when
switching on
Connection to mains disrupted.
Check AC plug and AC connection
Player does not start operation
CD is improperly loaded or dirty
Reload CD with the lettering
upwards or clean CD with dry and
soft cloth
No sound
Check the mixer and amplifier
connections
Possibly exchange connections
Does not read properly
Player is exposed to vibrations
Place player on a more stable
stand, rack etc
Does not read the program
Player is in normal playback mode Switch to pause mode and
reprogram
Pop noise
Inappropriate mixer or amplifier
connections
Check cable and jack quality
..............................................................................................................................................................................
8
CLEANING AND MAINTENANCE
1)
We recommend a frequent cleaning of the unit. Please use a soft lint-free and moistened cloth. Never
use alcohol or solvents!
2)
There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
3)
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
