14
•
EN
20
TRACK/FOLDER
press control
•
Turn the control to browse titles, and then press it to select the
desired title; title number and title name are indicated in the display
•
For selecting folders, first press the FOLDER button. Then turn the
control to browse the folders. Press the control to select the
desired folder. Afterwards, the unit switches back to the title
selection mode.
21
CUE button
As default setting pressing CUE will cause the player to enter pause
mode at the starting point (time index 0:00:00) of the title (button
lights red). To set the cue point at a different spot of the title, enter
pause mode and use the SEARCH
/
buttons to go to the exact
spot. As soon as playback is started a new cue point is memorized
(button flashes repeatedly). Holding down the CUE button changes
the function to preview, and allows you to stutter start or play from
the cue point.
22
button
Switches between play and pause. During playback the blue LED
lights, in pause mode it flashes.
23
PITCH BEND button
The Pitch Bend feature creates a temporary change of speed; as
long as you keep the buttons pressed, the beat of the title is slowed
down (-) or increased (+)
24
Pitch control
Sets the playback speed to up to ±16 %; the pitch percentage is
indicated in the display
25
Mounting points
The device is intended for installation in a 19" rack (483 mm), but can
also be used as a desktop device. In any case, air must be able to
flow unhindered through all ventilation openings to ensure adequate
cooling. For rack installation, 1 unit is required. You can fix the unit
with four screws M6 in the rack.
Rear panel
No.
Element
Function
26
LINE and REC OUT
audio outputs
Unbal. stereo RCA outputs for connection to units with line level inputs
(e.g. mixer or additional amplifier)
27
BALANCED OUT audio output
Stereo XLR jacks for connection to units with line level inputs (e.g.
mixer or additional amplifier)
Note: All outputs can be used simultaneously
28
MIC IN Input
Rear microphone input jack (combination XLR/6.3 mm jack)
29
AC power input
Plug in the supplied power cable here. The device is equipped with a
switching power supply, which allows mains voltage between 100 and
240 volts and thus worldwide use.
26
29
27
28
