00075258.DOC, Version 1.0
36/38
Playing a continuous loop
A section within a title can be repeated as a
seamless continuous loop as many times as
desired. This loop can be overwritten at any time
and is deleted when selecting another title,
changing the data carrier or switching the unit off
and on again.
1
Setting the starting point "on the fly"
: In
play mode, shortly actuate the button IN
when the desired starting point of the loop is
reached.
• Playback is not interrupted.
• The button lights red.
•
The display indicates [ ].
Setting the starting point precisely to 1
frame (1/75 second)
:
Set the unit to pause.
Then use the jogdial to go to the precise
spot. After turning, the current spot is
constantly repeated. Shortly actuate the
button IN to set the starting point.
2
Setting the end point "on the fly
": In play
mode, shortly actuate the button OUT when
the desired end point of the loop is reached.
• The section between the starting point and
the end point of the loop is continuously
repeated.
• The LEDs of the buttons IN and OUT will be
flashing.
•
The display indicates [ ].
Setting the end point precisely to 1 frame
(1/75 second)
: Set the unit to pause. Then
use the jogdial to go to the precise spot.
After turning, the current spot is constantly
repeated. Shortly actuate the button OUT to
set the end point.
• The section between the starting point and
the end point of the loop is continuously
repeated.
3
To exit the loop and to continue the title,
press the button OUT.
• The LEDs of the buttons IN and OUT will
stop flashing but will remain on to indicate
that a loop has been memorized and is ready
to be engaged.
• By selecting another title it is also possible to
exit the loop.
4
To restart the loop, press the button
RELOOP.
• The buttons IN and OUT will be flashing
again.
5
To program another loop, redefine the
starting and the end point with the button IN
and OUT.
Selecting the repeat functions
With the button REPEAT two different repeat
functions can be selected:
• first actuation of the button: continuous repeat of
the selected title (indication "REPEAT 1")
• second actuation of the button: continuous
repeat of all titles of the data carrier (indication
"REPEAT ALL")
• third actuation of the button: return to normal
play
Programming an individual title
sequence
For playing selected titles in a certain order, an
individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by
changing the data carrier or switching the unit off
and on again.
1
In pause mode, press the button PGM to
activate the programming mode.
• The display indicates "PROGRAM" and the
first memory location number P-01.
2
Use the buttons [
]
and
[
]
or the control
FOLDER/TRACK SEARCH to select the first
title for the title sequence.
• In programming mode, the folder navigation
is deactivated.
• The title name is not indicated.
3
After the title selection, press the button
PGM to confirm the selection.
• The display will show the second memory
location number P-02.
4
Proceed in the same way for all further titles
until the title sequence has been
programmed.
5
To start the playback of the title sequence,
press the button [
►
II
].
• The display will show the first memory
location number P-01.
• The title name is not indicated.
6
To add further titles to the title sequence,
follow steps 1 to 5.
7
To delete the title sequence and to continue
normal play, press the button [
►
II
] to switch
to pause mode and keep the button pressed
until the insertion "PROGRAM" will be
extinguished.
