19
•
EN
No.
Element
Function
1
Selector switch CD/USB/SD
In pause mode, short actuation of the button allows switching between
the input sources CD, USB, and SD. The LEDs will verify which source
is selected.
2
Display
Indicates all functions of the unit and information of the data carrier.
The display icons will be explained in section DISPLAY.
3
Buttons 0 to 9
Numerical keys for direct selection of a title.
4
USB port
USB port (type A) for connecting a USB storage device.
5
Memory card slot
Slot for inserting SD and SDHC cards.
6
Button TIME
• Audio CD: Switches the time indication between elapsed, remaining
title and total remaining time
• MP3: Switches the time indication between elapsed and remaining
title time
7
Button SGL/CTN
Engages single title playback mode (the unit will play one title and
stop). Otherwise, all titles of the CD or the selected folder will be
played.
8
Button JOG MODE
Determine the operating mode of the jog dial. The LED next to the
button indicates which mode is selected:
• Basic setting (LED off): Pitch Bend
• First actuation of the button (LED lights): fast forward and reverse
• Second actuation of the button (LED flashes): scratch mode
9
Button BPM-TAP
To determine the beats per minute (BPM) for the current tile. Tap the
buttons to the beat of the music until the value is indicated in the
display.
10
Button REVERSE
To switch to reverse play. With the function activated, the button will
light up.
11
Buttons SEARCH
and
Buttons for fast forward (
) and reverse (
) within a title.
12
Jog dial
• In play mode for the function pitch bend
• In pause mode for precisely selecting a certain spot
• For fast forward and reverse within a title when the function has been
activated with the button JOG MODE
• For generating scratch effects when the function has been activated
with the button JOG MODE
13
Button CUE
• As default setting pressing CUE will cause the player to enter pause
mode at the starting point (time index 0:00:00) of the title (LED lights
red).
• When keeping the button pressed in pause mode, the title is
momentarily played. As soon as you release the button the unit
instantly returns to the cue point.
• Every time a new cue point is set, the LED flashes repeatedly.
14
Button
Switches between play and pause. During playback the button lights
blue, in pause mode it flashes.
15
CD slot
For entering CDs.
16
Buttons PITCH BEND + and –
The function Pitch Bend creates a temporary change of speed. As long
as the buttons are pressed, the title is played slower or faster.
17
Pitch slide control
Sets the playback speed up to ±16 %. Slide it up to decrease the pitch,
slide it down to increase the pitch. The pitch percentage is indicated in
the display.
18
Button BRAKE
For selecting the brake effect for the start/pause function. With the
function activated, the button will light up.
19
Buttons IN, OUT, RELOOP
Buttons to memorize and play a seamless continuous loop.
• IN: Sets the starting point of a loop (LED lights red).
• OUT: Defines the end point of a continuous loop which is instantly
started (LEDs IN and OUT are flashing). The loop will continue to
play until the button OUT is pressed once again.
• RELOOP: Starts the loop once again.
Summary of Contents for XMT-1400 MK2
Page 1: ......
Page 5: ...5 DE 4 Bedienelemente und Anschlüsse ...
