Omnitronic XO-230 User Manual Download

Page: 14 / 20

•

Operating

Determinations

The  XO-230  is  an  active  crossover  designed  for
high-quality  frequency  division  for  all  professional
PA  applications.  It  features  Linkwitz-Riley  24  dB
per  octave  filters,  independent  output  gain
controls  for  level  matching,  output  phase
inversion, 40 Hz low cut filters, and optional mono
summing of the low frequency (subwoofer) output.

Power Supply

•

This product is allowed to be operated with an
alternating current of 230 V, 50 Hz and was
designed for indoor use only. The occupation of
the connection cables is as follows:

Cable

Pin

International

Brown

Live

Blue

Neutral

Yellow/Green Earth

•

The earth has to be connected! If the device will
be  directly  connected  with  the  local  power
supply  network,  a  disconnection  switch  with  a
minimum opening of 3 mm at every pole has to
be  included  in  the  permanent  electrical
installation. The device must only be connected
with  an  electric  installation  carried  out  in
compliance with the IEC standards. The electric
installation  must  be  equipped  with  a  Residual
Current  Device  (RCD)  with  a  maximum  fault
current of 30 mA.

Installation

•

Do  not  shake  the  device.  Avoid  brute  force
when  installing  or  operating  the  device.  When
choosing the installation spot, please make sure
that  the  device  is  not  exposed  to  extreme  heat,
moisture  or  dust.  There  should  not  be  any
cables  lying  around.  You  endanger  your  own
and the safety of others!

Taking into Operation

•

Operate the device only after having familiarized
with  its  functions.  Do  not  permit  operation  by
persons  not  qualified  for  operating  the  device.
Most  damages  are  the  result  of  unprofessional
operation!

Ambient Conditions

•

The  ambient  temperature  must  always  be
between  -5°  C  and  +45°  C.  Keep  away  from
direct  insulation  (particularly  in  cars)  and
heaters.  The  relative  humidity  must  not  exceed
50 % with an ambient temperature of 45° C.

•

This device must only be operated in an altitude
between -20 and 2000 m over NN.

•

Never use the device during thunderstorms.
Over voltage could destroy the device. Always
disconnect the device during thunderstorms.

•

This  device  must  never  be  operated  or
stockpiled  in  surroundings  where  splash  water,
rain,  moisture  or  fog  may  harm  the  device.
Moisture  or  very  high  humidity  can  reduce  the
insulation and lead to mortal electrical shocks.

•

When  using  smoke  machines,  make  sure  that
the device is never exposed to the direct smoke
jet  and  is  installed  in  a  distance  of  0.5  meters
between smoke machine and device.

Transport

•

Please use the original packaging if the device
is to be transported.

Cleaning and Service

•

Disconnect from mains before cleaning! Never
use solvents or aggressive detergents in order
to clean the device! Rather use a soft and damp
cloth.

•

There are no serviceable parts inside the device
except  for  the  fuse.  Maintenance  and  service
operations  are  only  to  be  carried  out  by
authorized  dealers! Should  you need any spare
parts, please use genuine parts.

Modifications and Guarantee

•

Please consider that unauthorized modifications
on the speaker system are forbidden due to
safety reasons!

•

If  this  device  will  be  operated  in  any  way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation
may  lead  to  dangers  like  short-circuit,  burns,
electric shock, etc.

WEEE Directive

If  the  units  are  to  be  put  out  of  operation
definitively,  take  them  to  a  local  recycling
plant for a disposal which is not harmful to
the  environment.  Do  not  dispose  of  as
municipal  waste.  Contact  your  retailer  or
local authorities for more information.