background image

11

WARRANTY INFORMATION

Omnitronix, Inc. hereby warrants that it will, as the buyers sole remedy, repair or replace, at its option,
any part of the Poll-Safe Model PS635 which proves to be defective by reason of improper materials or
workmanship, without charge for parts or labor, for a period of 12 (twelve) months. This warranty
period commences on the date of first retail purchase, and applies only to the original retail purchaser.

To obtain service under this warranty, you must obtain, either by telephone or letter, a return
authorization number from Omnitronix Technical Support. This authorization number may be obtained
by contacting Omnitronix Technical Support at the address and/or phone number below.  The defective
unit is to be returned to Omnitronix with shipping prepaid, and the return authorization number must be
clearly marked on the outside of the package containing the defective unit.

The dealer's bill of sale or other satisfactory proof of the date of purchase may be required to be
presented in order to obtain service under this warranty.

This warranty applies if your Poll-Safe Model PS635 fails to function properly under normal use and
within the manufacturer's specifications.  This warranty does not apply if, in the opinion of Omnitronix,
Inc., the unit has been damaged by misuse, neglect, or improper packing, shipping, modification or
servicing by other than Omnitronix or an authorized Omnitronix Service Center.

In no event shall Omnitronix, Inc. be liable for any loss, inconvenience or damage, whether direct,
incidental, consequential or otherwise, with respect to the Poll-Safe Model PS635.  Omnitronix, Inc.'s
liability shall be limited to the purchase price of the PS635. No warranty of fitness for purpose or of
fitness of the PS635 for any particular application is provided.  It is the responsibility of the user to
determine fitness of the PS635 for any particular application or purpose.

This warranty gives you specific legal rights.  These rights may vary from state to state, as some states
do not allow limitations on liability.

You may request information on how to obtain service under this warranty by contacting Omnitronix
Technical Support at the address and phone number below:

Omnitronix Technical Support

760 Harrison Street

Seattle, WA 98109

(206) 624-4985

Summary of Contents for Poll-Safe PS635

















Reviews: