4 Replacing the battery
4-2 Replacing the battery
BL50T/BL75T/BL100T
52
4-2-2 Replace the battery
Before and after battery replacement, the BMS settings must be changed.
1.
Press the Enter switch (
) to open the LCD menu.
2.
Press the Down switch (
), select [3. Settings], and press the Enter switch
(
).
3.
Select [Local Setting] and press the Enter switch (
).
4.
Press the Down switch (
), select [Menu Type], and press the Enter switch
(
).
5
Press the Down switch (
), select [Advanced], and press the Enter switch
(
).
Check that
✓
is displayed to the right of [Advanced] (The menu type is set for
[Advance]).
6.
Press the ESC switch twice to return the screen display to [3. Settings].
7.
Press the Down switch (
), select [Battery Setting], and press the Enter
switch (
).
8.
Press the Down switch (
), select [BMS Setting], and press the Enter
switch (
).
9.
Press the Down switch (
), select [Disabled], and press the Enter switch
(
).
The yellow LED starts flashing.
10.
Loosen the screws on the front panel (two locations) with a Phillips screwdriver.