26
6.
Insert 2 new battery packs into the additional battery unit as far as they will go.
➀
●
Replacement battery pack
For BUM300R : Model number BUB300R (2 required)
Attach the plate cover.
Insert the lug at the left of the cover into the hole in the main body and push it towards the main body.
➁
Use a screwdriver to securely tighten (turn clockwise) the 3 removed screws (2 on the left and 1 on the
right).
➂
Do not pinch the cable with the plate cover.
1
7.
Securely connect the connectors.
➀
Secure the connectors to the plate cover.
➁
You may hear a “pop” sound when you connect the battery if it is replaced after the
unit’s operation is stopped, but this sound is not abnormal.
S e c u r e t h e c o n n e c t o r s b y
inserting them between the 2
supports on the plate cover.
If you cannot secure a connector to the plate cover, the connector is not completely
connected.
Connect the connector again.
1
Make sure to
fi
t the left side of the plate cover into the inner side of the additional battery unit case.
2
2
2
2
Tighten the 3 screws
3