7. Connection Procedure
4
The dialog box on the right is
displayed. Check the message
on the dialog and if there is no
problem, click the
No
Button.
5
The dialog box on the right is
displayed, and the
CX-Programmer and the PLC is
automatically connected.
6
Confirm that the
CX-Programmer and the PLC
are normally connected online.
*The
icon is shown during
online connection.
Additional Information
If the CX-Programmer and PLC are not connected online, please check the connection of the
cable. Or, return to step 2, check the settings and repeat each step.
Refer to
Connecting Directly to a CJ2 CPU Unit Using a USB Cable
in
Chapter 3
Communications
in
PART 3: CX-Server Runtime
of the
CX-Programmer Operation Manual
(Cat. No. W466) for details.
Additional Information
The dialogs explained in the following procedures may not be displayed depending on the
environmental setting of CX-Programmer.
For details on the environmental setting, refer to
Options and Preferences
in
Chapter 3
Project Reference
in
PART 1: CX-Programmer
of the
CX-Programmer Operation Manual
(Cat. No. W466). This document explains the setting procedure when the Confirm all
operations affecting the PLC Check Box is selected.
15
Summary of Contents for CJ1W-NC82
Page 35: ...32...
Page 36: ...2013 0911 P562 E1 01...
