7
．
Serial Communications Connection Procedure
22
12
A confirmation dialog box on the
right is displayed.
Check that there is no problem
and click
Yes
.
13
Check that CX-Programmer and
PLC are normally connected
online.
*The
icon is pressed down
during online connection.
Additional Information
If PLC cannot be connected online, check the cable connection
After you check the cable connection, return to step 6, check the settings such as the
connection type in steps 7 to 9 and try again. For details, refer to
Connecting Directly to a CJ2
CPU Unit Using a USB Cable
of the
CX-Programmer OPERATION MANUAL
(Cat. No.
W446).
Additional Information
The dialog boxes explained in this document may not be displayed depending on the
environmental settings of CX-Programmer. For details on the environmental settings, refer to
Options and Preferences
in
CHAPTER 3 Project Reference
in
PART 1: CX-Programmer
of
the
CX-Programmer OPERATION MANUAL
(Cat. No. W446).
This document explains the setting procedures when ''Confirm all operations affecting the
PLC'' is selected.
Summary of Contents for CJ2*-CPU Series
Page 63: ...58...
Page 64: ...2015 1115 P641 E1 01...
