Chapter 1: Cobra ePLC350 Robot Quick Setup
1.4 Installing the Robot
Rotate the robot outer arm before removing the shipping bolts from the pallet. This will help
prevent the robot from tipping over. Use two people to lift the robot. See the following figure.
Bolts
Pallet
Bolts
Turn until it comes
into contact with
the mechanical end.
Worker B
Worker A
Figure 1-2. Rotate Outer Arm, Remove Bolts, then Lift the Robot
Mounting the Robot
Mount the robot to a rigid surface that will prevent vibration and flexing during operation. We
recommend a 25 mm (1 in.) thick steel plate, mounted to a rigid steel tube frame. See the fol-
lowing figure for the mounting hole dimensions.
Cobra ePLC350 Quick Setup Guide, 13590-000 Rev D
Page 5 of 14
Summary of Contents for Cobra 350 ePLC
Page 1: ...I592 E 01 Cobra 350 ePLC Robot Quick Setup Guide ...
Page 13: ......
