D6FZ
4
You can collect onsite data at an Air Flow Station data and use the Multi Data Viewer Light software to analyze
the data in your office to identify other locations for improvement on the production site.
O n t h e
P r o d u c t i o n
S i t e :
Data monitoring and
storing by Air Flow
Station
Multi Data Viewer Light
Display period is easy to change.
Check boxes allow you to display only the required data.
Total flow rate (bar graph)
Pressure (dotted line graph)
This software displays data for specific time periods, such as by the minute,
hour, or d ay. The tot al flow rate is dis played as a bar graph and the
momentary flow rate and pressure are displayed with dotted lines, so you can
see the overall situation at a glance.
Free
The PC Software
Download the PC Software Station Utility from the following OMRON website (http://www.fa.omron.co.jp/station-u-e).
Start data logging with a single
press of a button.
Save the data to
an SD memory card.
The Air Flow Station enables
easy data logging.
The PC Software Easily Analyzes Logged Data
Yo u c a n u s e c o m p a r a t i v e d i s p l a y s w i t h
previously logged data.
For example, side-by-side comparison of flow
rates by the day for different months is possible.
e,
e
n
In the Office:
Data storing and
analyzing
on a computer
By stopping the supply of compressed air with a solenoid valve when there
is no workpiece, compressed air usage is reduced. At the same time, the
Flow Sensor monitors the quantity of supplied compressed air to ensure
that it is within the specified range. Therefore, the Sensor helps maintain
and improve quality.
By giving priority to the monitoring of molding machines and
other machines that use large quantities of compressed air,
energy is efficiently saved.
Set the leak threshold value to identify when
repairs for leaks are required.
Monitor consumption and pressure fluctuations for each
production line to identify bottleneck lines or machines to
implement onsite improvements and save energy.
During operation
ON
OFF
When operation is stopped
Upper limit
Lower limit
leak
Leak output
During operation
When the leak increases
ON
OFF
When operation is stopped
Upper limit
Lower limit
leak
Leak output
You can save energy in a variety of applications.
Stop Ionizer Idling
D6FZ-FGT
Flow Management for
Molding Machines
D6FZ-FGT
D6FZ-FGS
Leakage Management
for Machines
D6FZ-FGT
D6FZ-FGS
Flow and Pressure
Management for Production Lines
D6FZ-FGS
