E2C
E2C
18
E2C-WH4A(F)
The E2C-WH4A(F) has NPN and PNP open collector outputs. Therefore, there is a degree of freedom in load types and power supply polarity.
Load
Direct load driving
DC solid-state load
Voltage load (logic load)
Model
g
Relay
Solenoid
Current-absorbing load
Programmable Controller
S3D8 Sensor Controller
g
( g
)
E2C-
WH4A
(F)
Load
Load
PNP output
NPN
output
12 to 24 V
0 V
Note:
Do not impose a voltage exceeding 40 V
on the load if the load is connected to an
independent power supply.
(See
note)
(See
note)
Load
NPN
output
12 to 24 V
0 V
Note:
Connect the load to the PNP output if
the load discharges current.
12 to 24 V
0 V
PNP output
E2C-AK4A, E2C-AM4A
The E2C-AK4A has relay contact and transistor photocoupler outputs and the E2C-AM4A has NPN and PNP open collector outputs. There-
fore, there is a degree of freedom in load types and power supply polarity.
Model
Load
E2C-AK4A
E2C-AM4A
Direct load driving
•
Relay
•
Solenoid
Amplifier Unit
Relay contact
output
Power
supply
DC or AC
Load
Amplifier Unit
Load
Load
12 to 24 V
PNP output
NPN output
0 V
Note:
Do not impose a voltage exceeding 40 V on the
load if the load is connected to an independent
power supply.
DC
solid-state
load
Current-absorb-
ing load
•
Programmable
Controller
•
Sensor Con-
troller (S3D8)
Amplifier Unit
Load
Transistor photocoupler output
Note:
Connect the load to negative transistor photo-
coupler output if the load discharges current.
Amplifier Unit
Load
12 to 24 V
NPN output
0 V
PNP output
Note:
Connect the load to PNP output if the load
discharges current.
2
Voltage load (logic load)
Amplifier Unit
Transistor photocoupler output
(12 to 24 V)
0 V
Amplifier Unit
12 to 24 V
0 V
PNP output
