E3Z-LT/LR/LL
2
Ordering Information
Sensors
(Refer to
Dimensions
on page 11.)
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Pre-wired Models with a 0.5-m cable are also available for these products. When ordering, specify the cable length by adding “0.5M” to the end of the model number
(e.g., E3Z-LT61 0.5M).
M12 Pre-wired Connector Models are also available. When ordering, add “-M1J” to the end of the model number (e.g., E3Z-LT61-M1J). The cable is 0.3 m long.
Also, the following connection forms can be manufactured. Ask your OMRON representative for details.
• Pre-wired Models with 1-m or 5-m cables
• Pre-wired Connector Models with M8 4-pin connectors or M8 3-pin connectors.
*4. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
Accessories
Slits
(A Slit is not provided with a Through-beam Sensor. Order a Slit separately if required.)
(Refer to
Dimensions
on page 14.)
Reflectors
(A Reflector is required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
(Refer to
Dimensions
on page 14.)
Sensing method
Appearance
Connection
method
Response
time
Sensing distance
Model
NPN output
PNP output
Through-beam
(E Receiver)
*
4
Pre-wired
(2 m)
*
3
1 ms
E3Z-LT61 2M
E3Z-LT81 2M
Emitter
E3Z-T61-L 2M
Receiver E3Z-T61-D 2M
Emitter
E3Z-T81-L 2M
Receiver E3Z-T81-D 2M
Connector
(M8, 4 pins)
E3Z-LT66
E3Z-LT86
Emitter
E3Z-T66-L
Receiver E3Z-T66-D
Emitter
E3Z-T86-L
Receiver E3Z-T86-D
Retro-reflective with
MSR function
Pre-wired
(2 m)
*
3
E3Z-LR61 2M
E3Z-LR81 2M
Connector
(M8, 4 pins)
E3Z-LR66
E3Z-LR86
Distance-settable
(BGS Models)
Pre-wired
(2 m)
*
3
E3Z-LL61 2M
E3Z-LL81 2M
Connector
(M8, 4 pins)
E3Z-LL66
E3Z-LL86
Pre-wired
(2 m)
*
3
0.5 ms
E3Z-LL63 2M
E3Z-LL83 2M
Connector
(M8, 4 pins)
E3Z-LL68
E3Z-LL88
Slit width
Sensing distance
Minimum detectable object
(typical)
Model
Contents
0.5 mm dia.
3 m
0.1 mm dia.
E39-S65A
One set
(contains Slits for both the
Emitter and Receiver)
Name
Sensing distance (typical)
Model
Remarks
Reflector
15 m (300 mm)
E39-R1
• Retro-reflective models are not provided with Reflectors.
• Separate the Sensor and the Reflector by at least the
distance given in parentheses.
• The MSR function is enabled.
7 m (200 mm)
E39-R12
7 m (200 mm)
E39-R6
Red light
60 m
*
1
(Using E39-R12)
(Using E39-R1)
7 m
(200 mm)
(Using E39-R6)
15 m
(300 mm)
7 m
(200 mm)
*
2
20 to 40 mm
(Min. distance set)
20 to 300 mm
(Max. distance set)
25 to 40 mm
(Min. distance set)
25 to 300 mm
(Max. distance set)
