54
Example
T
o
determine the state of the LED guide light of Unit 31:
Input: @31SG̲3[CR]
Output: @31SG̲0[CR] (not lit)
----------------------------------------------------------------------------------------------
■ SS -System data Set-
: Set system data
----------------------------------------------------------------------------------------------
SS changes system data settings. System data is data that is not reliant
on banks.
Input Command
@<unit̲number>SS̲<parameter>̲<value>[CR]
・ Set the following numerical values for <unit̲number>.
When XX (all Units) is specified as the unit number, the unit
53
----------------------------------------------------------------------------------------------
■ SG -System data Get-
: Acquire system data
----------------------------------------------------------------------------------------------
SG acquires system data information.System data is data that is not
reliant on banks.
Input Command
@<unit̲number>SG̲<parameter>[CR]
・ Set the following numerical values for <unit̲number>.
・ Set the following numerical values for <parameter>.
Output Response
@<unit̲number>SG̲<value>[CR] : Executed correctly
@<unit̲number>SG̲ER[CR]
: Not executed correctly
<unit̲number>
00 to 31: Designated unit number
<parameter> = 0: Unit number
<value>
01 to 31: Unit number
<parameter> = 1: Baud rate
<value>
1: 1200 bps
2: 2400 bps
3: 4800 bps
4: 9600 bps
5: 19200 bps
6: 38400 bps
<parameter> = 2: OFF delay timer value
<value>
1: 20 ms
2: 40 ms
3: 60 ms
4: 80 ms
5: 100
m
s
6: 120
ms
7: 140 ms
8: 160 ms
<parameter> = 3: LED guide light ON/OFF
<value>
0: OFF
1: ON
Parameter
0
1
2
3
Content
Unit number
Baud rate
OFF delay timer value
LED guide light ON/OFF
Meaning
Unit number
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
20 ms
40 ms
60 ms
80 ms
100 ms
120 ms
140 ms
160 ms
OFF
ON
Value
01 to 31
1
2
3
4
5
6
1
2
3
4
5
6
7
8
0
1
Unit No.
00 to 31
XX
Content
Unit number of Unit whose data is to be set.
Used to set data of all F10's.
形F10-C20/C25/C30/C35/C50/C55 02.11.19 10:12 AM ページ 53
