12
INT
R
ODUC
TI
ON
Pr
ecau
tion
s in
u
sing
th
e
Pro
d
u
ct
F250
Setup Manual
INTRODUCTION
Application Software Precautions
It will not be possible to start the Setup Menu if you change the contents of the Memory Card after installing it in a
personal computer or other device.
Never change the contents of the Card with operations such as the following:
•
Changing file names
•
Moving or deleting files
•
Overwriting data
•
Formatting
Turning OFF the Power
Do not turn OFF the power while a message is being displayed indicating that processing is
being performed.Data in memory will be corrupted, and the Controller may not operate correctly
the next time it is started.
Using the RESET Signal
Do not use the RESET input immediately after power is turned ON.When using the RESET input
to synchronize startup timing, wait at least 1 second after the Controller's power supply is turned
ON before turning ON the RESET signal.
Replacing the Battery
The Controller is equipped with a battery that backs up the clock.When the battery is low, the
message ''BATTERY LOW'' will be displayed on the monitor at startup.The battery must be
replaced when this message is displayed.Return the Controller to your OMRON dealer for
service. (The battery is not user-serviceable.)
•
The battery will last approximately 7 years.
Saving data.
---- ---ms
0.Scn 0
MON
