262
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
4-3-6-2. Initializing Settings of Intelligent Tap (F39-SGIT-IL3)
To initialize the settings of the Intelligent Tap, use the following steps.
1.
Set the Intelligent Tap DIP-SW as factory default settings. As shown below, set the DIP switch channel
1 as ON (lock) and channels 2 to 8 as OFF.
2.
To initialize the settings of the Intelligent Tap, click [Restore Intelligent Tap factory default settings](
).
When the settings of the Intelligent Tap is initialized, the setting data of F3SG-SR/PG that were backed up in the
Intelligent Tap is initialized. If the initialized Intelligent Tap is connected to F3SG-SR/PG and powered, the setting data of
F3SG-SR/PG is automatically backed up in the Intelligent Tap. For how to Initialize the settings of the Intelligent Tap with
the factory default settings, refer to
3-1-2. Initial Setup Method after Purchase
.
Even if the factory default settings are restored, the changed password will not be reset to the initial password "0000".
For details of password, refer to
1
2
3
4
5
6
7
8
O
N
: Indicates the s
w
itch position.
Summary of Contents for F3SG-PG Series
