10
Parallel Interface
PNP I/O type FJ-3005/FJ-3055/FJ-H3005/FJ-H3055
FJ-3005-10/FJ-3055-10/FJ-H3005-10/FJ-H3055-10
Internal Specifications
[Input] signals: RESET, DI0 to DI7, DSA0, DSA1
Input voltage
12 to 24 V DC ±10 %
ON current *1
5 mA min.
ON voltage *1 8.8 V min.
OFF current *2 0.5 mA max.
OFF voltage *2 1.1V max.
ON delay
5 ms max.
OFF delay
0.7 ms max.
Internal circuit
COM IN
[Input] signals: STEP0/ENCTRIG_Z0, STEP1/ENCTRIG_Z1,
ENCTRIG_A0 to 1, ENCTRIG_B0 to 1
Input voltage
12 to 24 V DC ±10 %
ON current *1
5 mA min.
ON voltage *1 8.8 V min.
OFF current *2 0.5 mA max.
OFF voltage *2 0.8 V max.
ON delay
0.1 ms max.
OFF delay
0.1 ms max.
Internal circuit
COM IN
Input terminal
Input terminal
*1 ON current/ON voltage
This refers to the current or voltage values needed to shift from the OFF → ON state. The ON voltage value is the potential difference
between each of the input terminals and COM IN.
*2 OFF current/OFF voltage
This refers to the current or voltage values needed to shift from the ON → OFF state. The OFF voltage value is the potential difference
between each of the input terminals and COM IN.
[Output] signals: BUSY0, RUN/BUSY1, OR0 to 1, GATE0 to 1,
ERROR, DO0 to 15, READY0 to 1
Output voltage
12 to 24 V DC ±10 %
Load current
45 mA max.
ON residual voltage 2 V max.
OFF leakage current 0.2 mA max.
Internal circuit
COM OUT
[Output] signals: When STGOUT0 to 3 are used,
connect the COMIN terminal.
Output voltage
12 to 24 V DC ±10 %
Load current
45 mA max.
ON residual voltage 2 V max.
OFF leakage current 0.2 mA max.
Internal circuit
COM IN
㩷
COM OUT
I/O Connector
No. Signal name Wire color Mark (red)
Function
No. Signal name Wire color Mark (blk)
Function
I/O Connector wiring is the same as NPN I/O type.
Output terminal
Output terminal
Load
Load
