2
Setting
Scenes
(Measurement
Flow)
FZ3 User's Manual
Editing Processing Units in Scenes
49
●
Setting details of a processing unit (
)
Sets the properties of any processing unit in a scene.
●
Shift area(
)
Changes related figure data in one batch.
●
Creating a folder (
)
Select when multiple processing units are to be managed as one group.
●
Operating processing units as a group (
)
Used when processing units are copied or deleted together.A checkbox is displayed in the
processing unit if [Multiple selection] is tapped. Checked processing units can be operated as a
group.
●
Referring to other scene flows (
)
Units of other scenes can be referred to and added to the current scene flow.
Selecting a scene to refer to displays the flow for that scene.
Note
●
If a processing unit is inserted, the numbers for the subsequent processing units increase by one.With
processing items related to results output or branch control, the numbers for processing units set as references
also automatically increase by one.
●
If a button other than [Paste] is tapped after pasting a processing unit, continued pasting of the processing
cannot be performed.
●
If a processing unit is deleted, the numbers for the subsequent processing units decrease by one.With
processing items related to results output or branch control, the numbers for processing units set as references
also automatically decrease by one.
●
To make a specific processing unit not display in a flow on the ADJUST window or RUN window, insert a "*"
(single byte) at the beginning of the processing unit name.
Acesst 1.0 6251194
