5
Changing
the
System
Environment
110
Setting the System Operation Environment
FZ3 User's Manual
Setting the System Operation Environment
Sets the controller's operation environment. The following settings are available.
●
Setting the Date and Time [Date-time Setting] (p.110)
●
Selecting the Language [Language Setting] (p.110)
●
Setting the Fan Rotation Speed [Fan Control Setting] (p.111)
●
Setting the Start-up Status [Startup Setting] (p.112)
●
Setting the RUN Window Display [RUN mode View Setting] (p.114)
●
Setting the RUN Window Shortcut [Create Shortcut] (p.115)
●
Setting the Encoder Trigger [Encoder Trigger Setting] (p.115)
●
Setting the STEP Input Detection Pulse Width [STEP Setting] (p.116)
●
Setting the RUN Window Password [Password Setting] (p.117)
In addition, the controller model and measurement application version can be checked.
●
Checking System Information [System Information] (p.119)
Setting the Date and Time [Date-time Setting]
Confirm that the date and time on the embedded calendar are correct, and make corrections if they are
not.
The log data dates and times, etc. are set based on contents set here.
1.
On the Main screen, tap the [System] menu - [Controller] - [Date-time setting].
The Date-time Setting window is displayed.
2.
Set the date and time.
1.
Tap the date that is to be set.
2.
Set the time.
3.
Tap [OK].
The Date-time Setting window closes.
Selecting the Language [Language Setting]
Sets the language used for the characters displayed on the screen.Messages in the application software
will be displayed in Japanese or English depending on the language selected here.
Acesst 1.0 6251194
