5
Changing
the
System
Environment
FZ3 User's Manual
Setting the System Operation Environment
119
4.
Tap [OK].
The display returns to the Password Setting window.
3.
Tap [OK].
A confirmation message is displayed.
4.
Tap [OK].
The Password Setting window closes.
Important
●
Please contact us if you forget the passwords you set.
Checking System Information [System Information]
The controller model and measurement application version can be checked.
1.
On the Main screen, tap [System] - [Controller] - [System initialization].
The System Information window is displayed.
2.
Check the information.
The controller model and measurement application version can be checked.
3.
Tap [Memory state].
The following information can be checked.
●
Available application memory
The application memory is the memory used by all applications.
By confirming remaining capacity, this provides a rough standard for confirming status
while operating.
●
Available data memory
The data memory is the amount of memory that can be used for scene group data.Check
the available memory that can be used for unit data and settings data for each unit.
4.
Tap [Close].
The System Information window closes.
Acesst 1.0 6251194
