5
Do
not
press the blue button if
the beep sounds only one time.
The measurement will start
automatically.
6
Slightly move the GentleTemp
510
®
‚ while the unit tries to
detect the temperature of the
eardrum for a maximum of
10 seconds.
3
After all the symbols on the display
illuminate, “°C” flashes.
4
Insert the probe in the ear as far
as it comfortably goes in the
direction of the eardrum and
slightly move the unit.
8
9
When the unit beeps four times,
the measurement is finished.
The highest measured tempera-
ture is shown on the display.
3.2
Mode 2: the 10 seconds measurement in 9 steps.
This function is recommended when the direction of the eardrum may be difficult to find such as measuring the temperature of an infant.
1
Insert the probe cover until
it clicks.
2
Push the blue button.
The thermometer is turned on.
7
Wait for two beeps.
8
When the unit has beeped twice,
push the blue button
leaving the unit in the ear.
13413 MC-510-E2_ver.6_MC-510-E2 10/04/2013 17:20 Page 8
GentleTemp 510
English
