H5AN
Operation
■
Timing Chart
Digital Display
Operation Mode
(The control output and digital display when the set time is up differ in each of the operation modes available.)
UP Display
DOWN Display
(See note)
(See note)
(See note)
(See note)
Note:
After the set time has elapsed, operation continues according to the mode (N, F, C, R, K, P, or Q).
Mode
UP display
DOWN display
Operation after the set time is up
N
The control output and digital display
are held until a reset input is applied.
F
In UP mode, the digital display
continues to increment up to “9999”
even after reaching the set value and
then returns to all zeroes. In DOWN
mode, the digital display continues to
up 9999, and then decrements “9998,
9997, ...,” after reaching all zeroes.
The control output is held until a reset
input is applied.
C
The digital display returns to the initial
setting once the set time has elapsed
and the timer restarts the timing
operation.
When the set time has elapsed, the
output signal is generated during the
one-shot time. The timer repeats this
cycle.
R
The digital display returns to the initial
setting after the one-shot time and the
timer restarts the timing operation.
When the set time has elapsed, the
output signal is generated during the
one-shot time. The timer repeats this
cycle.
http://www.ia.omron.com/
4
(c)Copyright OMRON Corporation 2008 All Rights Reserved.