2. Running the Glucose Control Solution Test
3) Before using the control solution, gently shake the control bottle to
mix well.
4) Remove the control bottle cap and wipe the tip of the bottle with a
tissue.
5) Squeeze the bottle until a tiny drop forms at the tip of the bottle and
put this drop on a clean surface.
6) Touch the drop to the tip of the confirmation window of the test strip.
When the confirmation window is filled with control solution
completely, the meter will automatically start to run the
measurement.
7) After 5 seconds, the screen will display test result. The meter will
automatically turn off after the test strip is removed. Discard the
used test strip in accordance with local regulations.
* Write the date you first open the bottle on the bottle label. The control
solution must be discarded after three months from the date the bottle
was opened, on the “discard
＂
date or on the “expired
＂
date on the
bottle label, whichever comes first. Do not use control solution that is
past the “expired
＂
or discard date.
Warning: Before running test glucose control solution test, always
check the expiration date. DO NOT use control solution if
expired over three months of first opened day.
25
BLOOD GLUCOSE MONITORING SYSTEM-HGM-111
