16
After Treatment – Storing the unit
If you leave the Pads without taking care of them, they will become dirty or the adhesive property will
drop. When the treatment ends, attach the Pads to the Electrode Holder and store them.
1. Turn off the Power and remove the Electrode Cord
Plug from the Main Unit.
4. Bundle the Electrode Cord and wrap it around the
Electrode Holder.
❇
Wrap the Electrode Cord loosely.
5. Store the Main Unit and the Electrode Holder in the
Soft Fabric Case.
3. Lightly attach the Pad to the Electrode Holder
❇
You may leave the Electrode Cord connected with the Pad as it is.
❇
Do not press the Pad hard to the Electrode Holder. It may cause
the adhesive surface to be damaged.
❇
Keep the Electrode Holder clean.
2. Peel off the Pad.
❇
Hold the Tab to peel off the Pad without touching the adhesive
surface.
Example: When the Pad is attached
to shoulder
RELIEVE
SHLDR
SOLE
LEG
WAIST
TAP
KNEAD
PUSH
RUB
REGION
MASSAGE
POINT
WIDE
R
SPECIAL
MODE
REPEAT
SOFT
OFF
INTENSITY
/POWER
W
ELECTRONIC
NERVE STIMULATOR
TENS-EN01-22[HV-F127]-2 11/17/03 6:49 PM Page 17