Chapter 1: Introduction
This manual contains information that is necessary to install and use iX3 565 Robot with
EtherCAT. Please read this manual and make sure you understand the functionality, install-
ation, and performance of the robot before attempting to use it.
Related Manuals
Use the following related manuals for reference.
Table 1-1. Related Manuals
Manual
Description
Robot Safety Guide (Cat. No.
I590)
Contains safety information for OMRON industrial robots.
Sysmac Studio Robot Integ-
rated System Building Func-
tion with Robot Integrated
CPU Unit Operation Manual
(Cat. No. W595)
Describes the operating procedures of the Sysmac Studio.
Sysmac Studio Robot Integ-
rated System Building Func-
tion with IPC Application
Controller Operation Manual
(Cat. No. W621)
Describes the operating procedures of the IPC
Application Controller.
eV+3 User's Manual (Cat.
No. I651)
Provides a description of the eV+ programming language
and functionality.
eV+3 User's Manual (Cat.
No. I651)
Provides reference to eV+ Keyword use and functionality.
eV+3 Keyword
Reference Manual (Cat. No.
I652)
Provides information that is necessary to use the robot con-
trol function of the NJ-series CPU Unit.
IPC Application Controller
User’s Manual (Cat. No.
I632)
Provides information that is necessary to use the robot con-
trol function of the IPC Application Controller.
NJ-series Robot Integrated
CPU Unit User's Manual
(Cat. No. O037)
Describes the settings and operation of the CPU Unit and
programming concepts for OMRON robot control.
T20 Pendant User's Manual
(Cat. No. I601)
Describes the use of the optional T20 manual control
pendant.
22792-000 Rev. A
iX3 565 Robot with EtherCAT User’s Manual
9
