56
4.
Settings needed to measure electricity
4.3 RS-485 communication settings (continued)
■
Set the vertical parity (Ex.: set to ODD)
Select "NONE" for no parity, "EVEN" for even parity, and "ODD" for odd parity.
1
Press the [MODE• ] key to move to the common settings "CMMN" category display screen.
2
From the common setting items, press the [
][
] keys to move to "Parity (MENU 04)".
3
Press the [ENTER] key to enter the setting mode.
4
Press the [
][
] keys to select "ODD".
5
Press the [ENTER] key to confirm your selection.
■
Set the transmission wait time (Ex.: set to 15 msec)
You can set the time to wait between when a response is created and when it is sent. The setting can be changed in
units of 1ms. The default value is 20ms.
1
Press the [MODE• ] key to move to the common settings "CMMN" category display screen.
2
From the common setting items, press the [
][
] keys to move to "Transmission wait time (MENU 05)".
3
Press the [ENTER] key to enter the setting mode.
4
Press the [
][
] keys to change the value to "15".
– Press the [MODE• ] key to move one place to the left.
– If you press the [MODE• ] key on the end at the left, the cursor moves to the right end.
5
Press the [ENTER] key to confirm your change.
1
Automatic transition
2
4
5
3
1
Automatic transition
2
4
5
3
