How to Clean the Unit after Inhalation
14
Correct Use of the Unit
How to Care the Unit after Inhalation
1
Remove the parts from the Main Unit.
Remove Inhalation Mask or Mouthpiece, Mask Adapter, and
Medication Bottle from the Main Unit.
(Refer to Page 9.)
2
Discard the remaining medication.
After removing the Mesh Cap, open the Medication Bottle
Cap and discard the medication.
(Refer to Page 9.)
3
Wash the parts sufficiently in water.
Wash Inhalation Mask or Mouthpiece, Mask Adapter,
Medication Bottle, and Mesh Cap in water.
- Carefully wash the Mesh when using a medication
having high surface activity or viscosity such as
medication solubilizing agent or expectorant because
the medication is often left on the Mesh.
- Please be careful not to spray water on the Main Unit.
Be sure to clean and store the unit after inhalation.
If you do not clean the unit after inhalation, medication will be dried and
adhered, and will not nebulize normally the next time. If this happens, clean the
Mesh Cap by boiling to wash off the adhered medication.
(Refer to Page 16.)
Lift up the Mesh Cap by
applying your thumb on
the brim.
Lift up the
Mesh Cap
perpendicular
to the
Medication
Bottle.
(1)
(2)
(3)
Discard the
remaining
medication.
Disengage the
Medication Bottle Cap
Locking Lever and
open the Medication
Bottle Cap.
Do not insert your
finger into the
Nebulization Port.
EN-p2-20-(NE-U22)-3 3/25/02 4:48 PM Page 14
