11
4
Library Versions
This chapter describes the versions of the IAG library.
You must check versions of the items listed in the table below before using the library.
Item
Description
How to Check the Version
IAG Collection
The distributed IAG collection has
library versions.
The version can be checked in the
Sysmac Studio IAG Collections
Manager pop-up.
IAG
Version of each IAG. It manages
specification change, bug
correction, and others.
The version can be checked as an
IAG property in IAG Collections
Manager. Also, in Properties after
located as an object.
NA
The version of NA with which IAG
has been created. IAG library is
not applicable to older versions
than that in this guide because
supported functions depend on
versions.
See
Minimum supported HMI
version
in IAG Collections
Manager.
NA
OS
The version which NA runtime can
operate. It differs according to
NA’s Runtime version.
System Menu of NA. It will be
checked if necessary when you
upgrade NA runtime version of a
project in Sysmac Studio.
Versions of IAG collection, NA runtime, and OS in this guide
Item
Version
Remarks
IAG Collection
Ver1.00
Filename extension is “.iag”.
IAG
Noted individually
Refer to Chapter5 “Properties.”
NA
Ver. 1.11 and later
NA
OS
Ver. 7.3.0 and later
EtherNet I/P devices that the IAG collection supports, and the versions
Supported Device
Version
Remarks
NX-CSG320
Ver. 1.00 and later
Operation tested with Ver. 1.00
NX102□□□□
Ver. 1.31 and later
Operation tested with Ver. 1.31
NX102□□□□
Ver. 1.18 and later
Operation tested with Ver. 1.18
NX7□□□□
Ver. 1.18 and later
Operation tested with Ver. 1.18
1783-ETAP
Ver. 2.02 and later
Operation tested with Ver. 2.02
GI-
S□D□□□□
Ver. 1.2 and later
Operation tested with Ver. 1.2
