3
Terms and Conditions Agreements
Thank you for your usage of products of Omron Corporation (“Omron”). Without any special
agreements, these terms and conditions shall apply to all transactions regardless of who
sells.
Definitions of Terms
Omron product(s): Omron’s factory automation system devices, general control devices,
sensing devices, and electronic/mechanical components.
- Catalogues: Any and all catalogues (including “Best Components” and other catalogues),
specifications, instructions and manuals relating to Omron products, including
electronically provided data.
- Conditions: Use conditions, rating, performance, operating environment, handling
procedure, precautions and/or prohibited use of Omron products described in the
catalogues.
- User application(s): Application of Omron products by a customer, including but not limited
to embedding/using Omron products into customer’s components, electronic circuit boards,
devices, equipment or systems.
- Conformity: (a) conformity, (b)performance, (c) no infringement of intellectual property of
third party, (d) compliance with laws and regulations, and (e) conformity to various
standards of Omron products in user applications.
Note about Descriptions
Rating and performance is tested separately. Combined conditions are not warranted.
- Reference data is intended to be used just for reference. Omron does NOT guarantee that
the Omron Product can work properly in the range of reference data.
- Examples are intended for reference. Omron does not warrant the conformity in usage of
the examples.
- Omron may discontinue Omron products or change specifications of them because of
improvements or other reasons.
Note about Use
Adopt and use Omron products considering the following cautions.
- Use the product in conformance to the conditions, including rating and performance.
- Check the conformity and decide whether or not Omron products are able to be adopted.
Omron makes no guarantees about the conformity.
- Make sure in advance that electricity is properly supplied to Omron products and they are
set up rightly in your system for intended use.
- When you use Omron products, ensure the followings: (i) allowance in aspect of rating and
performance, (ii) safety design which can minimize danger of the application when the
product does not work properly, (iii) systematic safety measures to notify danger to users,
and (
ⅳ
) periodical maintenance of Omron products and the user application.
- Omron assumes no responsibility for any direct or indirect loss, damage and expense
resulting from infection of our products, installed software, any computer devices,
computer programs, network, and databases with the followings:
