BN
50
S / BN
75
S / BN
100
S / BN
150
S / BN
220
S / BN
300
S
4
35
3) Output voltage setting (100V/115V)
Two types of output voltage can be set. (Setting range: 100V/115V)
Output is performed at the set voltage, with no relation to the input voltage.
4) Power output stop delay time setting
It is possible to set the delay time for stopping the power supply output after the BS signal is
received. (Setting range: 0 to 10 minutes)
<Note>
The remote ON/OFF signal is not related to this setting.
When the remote ON/OFF signal is “High”, the UPS stops the output immediately.
AC input
BS signal
Power supply
output
Power output stop delay time
This timing is 10 ms or 10 sec.
Timing corresponds to the settings
for switch
.
ON
OFF
ON
OFF
ON
OFF
See also
Page 33
