32
3. Operating the UPS
2. Power switch functions during stoppage
●
Turn the power switch (
) OFF. If the switch is turned ON (pressed) again while the beeper is sounding,
the output stoppage ends and operation (output) continues.
●
When the battery deterioration indicator
(blinking once every 2 seconds and beeping) appears, the
alarm can be turned off by turning the power switch
OFF and then ON again.
●
Stopping procedure
1. Press the power switch (
) of the UPS.
●
The switch on the front side returns to its original position, the beep sounds for 3 seconds, and output
stops immediately.
●
All of the indication lamps go out.
After that, the
indicator blinks once every 10 seconds. (Charging status)
In the event that commercial power supply is cut off, the indicator stops blinking and goes out, and
charging stops.
When using the included UPS monitoring software, the battery deterioration indicator
can be turned off by performing a self-diagnosis test on the battery after replacing it.
When the battery deterioration indicator appears, replace the battery.