BU
60
RE/BU
100
RE
3
25
OFF
OFF
OFF
There is a problem with the unit.
Contact the shop of purchase or the
OMRON Electronic Systems &
Equipments Customer Support Center
at: __________.
32
33
Failure occurred. When the beep
stop switch is pressed, the details
of the error are displayed.
34
(Same as above.)
Stopped charging due to
abnormal drop in battery charge
voltage.
Displays the details of the error that
occurred only while pressing the beep
stop switch while in state No. 32.
Continuous
Continuous
Continuous
No. Status
indicator
Power supply
output
lamp
Beep
Charging
Description
Solution
Bypass
operation
lamp
Battery
replacement
lamp
4. Displays and beeps when there is an equipment failure
(2) When "Power" switch is "OFF"
( indicates blinking)
( indicates the display is ON)
( indicates the display is OFF)
Stopped charging due to
abnormal rise in battery charge
voltage.
See also
Replacing the battery
Page 39
See also
Replacing the battery
Page 39
See also
Replacing the battery
Page 39
5. Display and beep for battery replacement
35
36
The self-diagnosis test detected
a weak battery
(warning only, output continues).
Battery life counter went off-scale
(Warning only. Outputs continue.)
Battery life counter has been
reset.
Replace the battery.
You can replace the weak battery
with a separately purchased
replacement battery as needed.
37
●
○
●
Be sure to reset the battery life
counter when replacing the
battery.
Replace the battery. You can
replace the weak battery with a
separately purchased replacement
battery as needed.
_ _
_ _
_ _
_ _
Intermittent
2-second
intervals
Intermittent
2-second
intervals
None
ON
ON
●
