9
1. Preparation
BU100XR2
1. Instruction Manual
(English and Japanese versions)
.... 1 each
2. Telephone cable
(modular cable) ...................................
1
3. Warranty card ........................................................... 1
4. User registration card ............................................... 1
5. 3P-2P adaptor .......................................................... 1
6. Upright stand ........................................................... 2
7. AC input cable ......................................................... 1
8. 19-inchrackmount fittings (6 screws) ....................... 2
9. Rackmount bolts and nuts .............................. 4 each
10. "Identification of operating condition" label .............. 1
BU200XR2 (main unit)
1. Instruction Manual
(English and Japanese versions)
.... 1 each
2. Telephone cable (modular cable) ............................ 1
3. Warranty card ........................................................... 1
4. User registration card ............................................... 1
5. 3P-2P adaptor .......................................................... 1
6. 15A output receptacle .............................................. 1
7. 19-inch rackmount fittings (6 screws) ............. 2 each
8. Rackmount bolts and nuts .............................. 4 each
9. "Identification of operating condition" label .............. 1
10. Fuse (for Output 20A) ............................................... 1
11. AC input terminal cover ............................................ 1
MB200XR2 (battery unit)
1. Instruction Manual
(English and Japanese versions)
.... 1 each
2. Battery connecting cable ......................................... 1
3. 19-inch rackmount fittings (6 screws) ...................... 2
4. Rackmount bolts and nuts .............................. 4 each
UPS monitoring software
(Attached to the BU100XR2/BU200XR2)
1. Instruction Manual .................................................... 1
2. Installation CD-ROM ................................................. 1
3. Connecting cable (9-pin serial cable) ...................... 1
4. User registration card ............................................... 1
Care must be taken on unpacking of BU100XR2 as the built-in battery leans the center of gravity of BU100XR2
to one side.
Unpack and carry this product bearing the weight in mind. Place and
run the UPS on a structurally sound base.
●
Toppling and dropping may cause injury.
●
The weight of the backup UPS
BU100XR2: 19kg
BR200XR2: 12kg (main unit)
MB100XR2: 26kg (add-on battery unit)
MB200XR2: 26kg (battery unit)
1-2 Checking the accessories
If you should notice defects or anything wrong, please contact your distributor at once.
Cautions
1. Preparation
1-1 Unpacking the UPS
Installation CD-ROM
Connecting cable
Telephone cable
(modular cable)
3P-2P adaptor
TUpright stand
AC input cable
19-inch rackmount
fittings
Rackmount bolts
and nuts
3P-2P adaptor
Telephone cable
(modular cable)
15A output receptacle
19-inch
rackmount
fittings
Rackmount bolts
and nuts
19-inch
rackmount
fittings
Battery connecting
cable
Rackmount bolts
and nuts
Fuse
(
φ
6.35x32mm)
AC input
terminal cover
