15
2. Installation and connection
Carry the unit considering its weight and balance, and place it on a stable
and robust base.
●
Dropping or toppling the unit may cause injury.
●
The weight of this unit is approximately: 5 kg (BX35F/BX50F/BX50FW)/ 9 kg (BX75SW).
●
If you drop the unit, stop using it and have an inspection and repair be done.
For repair, contact us; ____
Keep plastic package bags out of reach of children.
●
They may put their heads into it, and may be suffocated.
Make sure to connect the AC input plug of the unit into a wall outlet
(commercial power) with rated input voltage.
●
Connecting to a wall outlet (commercial power) of a different rated input voltage may result in fire.
●
The unit may fail.
Do not connect devices such as dryers, which have a half-wave rectifier
where only half-cycles of the AC power flows.
●
Overcurrent may damage the UPS.
Connect the unit to a wall outlet (commercial power) with a current capacity
of 8A or more (BX35F) or 12A or more (BX50F, BX50FW, and BX75SW).
●
Otherwise, the power cord may be heated.
●
When equipment with the maximum output capacity is connected, a maximum current of 8A
or (BX35F) or 12A (BX50F, BX50FW, and BX75SW) flows.
Provide secure grounding.
●
For a 3P wall outlet, directly connect the AC input plug of the unit to it. Not doing so may cause
an electric shock in the case of unit failure or electric leakage.
●
When you use a 3P-2P conversion plug for AC input plug, be sure to perform grounding
before connecting the AC input plug into a wall outlet (commercial power).
Do not disconnect the grounding before disconnecting the AC input plug from a wall outlet
(commercial power).
●
Grounding is necessary to enable its surge protection function.
Do not disassemble, repair, or modify the unit.
●
Doing so may cause an electric shock or a fire.
Do not install the unit in other than specified orientations.
●
Dropping or toppling the unit may cause injury.
●
If you install the unit in an orientation other than specified, the unit cannot be protected from a
battery fluid leakage.
When installing the unit vertically, do not put any object on it.
When installing the unit horizontally, do not put any object heavier than 25kg.
●
Doing so may cause distortion of/damage to the case, which may cause a fire.
●
When replacing the battery, remove objects that have been placed on the unit.
Caution
(for installation and connection)
2. Installation and connection
2-1 Precautions and notes on installation and connection
