Promi-SD 205-OA User Manual – 2. Configurations
17
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Serial port settings can be changed by <Start Configuration> and <PromiWIN Configuration> of PromiWIN in the menu
bar at upper left corner of the window without re-running the PromiWIN program.
The icons in the left side window come to the corresponding windows.
In device configuration window, hardware reset can be executed or operation mode and RS232 can be configured as
well. Security option also can be configured in this window.
Promi-SD supports two security options, Authentication and Encryption. If you check the Authentication option, you
must also enter the Pin Code value. If the authentication is activated, the connection, only between the Master and
Slave device that share the same Pin Code, is established. In case that Promi-SD connects to other Bluetooth device,
you must enter the other device’s Pin Code in Promi-SD. In general Bluetooth devices, 1234 or 0000 is used as a default
value. If you check Encryption option, the Promi-SD encrypts packets and sends them. The Encryption options works
well in case that only one between Master and Slave uses this option.
Promi-SD has 4 response messages, ‘OK’, ‘ERROR’, ‘CONNECT’, and ‘DISCONNECT’. In some cases, these responses can
affect the host system unexpectedly. To prevent this, user can set the Command response to ON or OFF.
