S8BA-LF
18
Conformance to UL
•
This product must be installed within a control panel with an
internal heater or other unit to protect against the formation of
condensation.
•
Gaps in the door to the control panel must be completely filled or
covered with gaskets or other material.
•
For use as a UL compliant device, the specifications for S8BA-
24D24D480LF become as follows:
•
Maximum input current: 20 A
•
Rated output current/capacity: 16.7 A/400 W
•
For use in Pollution Degree 2 Environment.
•
Surrounding Air Temperature, 55°C.
•
Make sure to connect the device with Class 2 output to the USB
port.
FCC CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
•
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment.
•
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
•
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
Conformance to UL
Conformance to FCC
Conformance to KC
