S8JX
14
Mounting
The following three mounting methods are possible.
A. Front-mounting: Refer to
Mounting Bracket Provided with Front-mounting Power Supplies
a
on page 20.
B. Bottom-mounting
C. Side-mounting
Note:
Additional mounting methods are also available using DIN Rail-mounting models.
Standard Mounting
Note: 1.
Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or damage of internal parts. Use the
standard mounting method only.
2.
When mounting the Power Supply, mounting it to a metal plate (
*
) is recommended.
3.
Install the Power Supply so that the air flow circulates around the Power Supply, as the Power Supply is designed to radiate heat by
means of natural air flow.
15-/35-/50-/100-/150-W Models
15-/35-/50-/100-/150-W Models
300-W Model
600-W Model
B
C
Front-mounting
*
DIN Rail-mounting
Bottom-mounting
*
Vertical Side-mounting
*
Horizontal Side-mounting
*
Front-mounting
20mm min.
20mm min.
20mm min.
20mm min.
Bottom-mounting
Side-mounting
DIN Rail mounting
Note: 1.
Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or
damage of internal parts. Use the standard mounting method only.
2.
When mounting the Power Supply, mounting it to a metal plate (
*
) is recommended.
3.
Install the Power Supply so that the air flow circulates around the Power Supply, as the Power Supply
is designed to radiate heat by means of natural air flow.
Front-mounting
20mm min.
20mm min.
20mm min.
20mm min.
Bottom-mounting
Side-mounting
Note: 1.
Improper mounting will interfere with heat dissipation and may occasionally
result in deterioration or damage of internal parts. Use the standard mounting
method only.
2.
When mounting the Power Supply, mounting it to a metal plate (
*
) is
recommended.
3.
Install the Power Supply so that the air flow circulates around the Power
Supply, as the Power Supply is designed to radiate heat by means of natural
air flow.
益成自動控制材料行 http://sale.enproteko.com
益成自動控制材料行
http://sale.enproteko.com