Omron S8VS - MODEL 15-30-60-90-120-180-240W, Manual

Switch Mode Power Supply

 S8VS

11

Engineering Data (S8VS-

@@@

24

@@

 Only)

■

Mode Change

S8VS-

@@@

24A

@

 Models (with display monitor) can display the output voltage, output current, peak hold current, or maintenance forecast moni-

tor time. S8VS-

@@@

24B

@

 Models (with display monitor) can display the output voltage, output current, peak hold current, or total run time. 

Note:

No setting mode is provided for the S8VS-06024

@

.

■

Operation Mode

Various states of the Power Supply are indicated.

Note: 1.

The peak hold current starts measuring the current 3 seconds after the Power Supply is started. Inrush current is thus not measured. 

2.

For the factory setting, the output voltage will be displayed when the power supply is first turned ON. Thereafter, the output voltage will
be indicated in the same display when shutting down.

■

Setting Mode (Except for S8VS-06024

@

)

Set various parameters of the Power Supply.

Note: 1.

Press and hold the (9) Up Key 

U

 or (10) Down Key 

D

 for two seconds or more to increase or decrease the value rapidly.

2.

The S8VS-06024

@

 is not provided with the setting mode and its parameters are fixed at the shipment setting.

Power-ON

Operation mode

Press Mode key         and 
hold for three seconds or more.
Or no key operation for 30 seconds or more.

Model indication

Setting mode

Press and hold 
Up key 

U

 or Down Key 

D

for three seconds or more.

Output voltage
(Voltage output by Power Supply is 
monitored and displayed.)

Output current
(Current output by Power Supply is 
monitored and displayed.)

Peak hold current
(Maximum current output by Power Supply is 
recorded and displayed.)

Total run time monitor

Output voltage
(Voltage output by Power Supply is 
monitored and displayed.)

Output current
(Current output by Power Supply is 
monitored and displayed.)

Peak hold current (See note 1.)
(Maximum current output by Power Supply is  
recorded and displayed.)

Maintenance forecast monitor

Models with Maintenance Forecast Monitor (S8VS-

@@@

24A

@

)

Models with Total Run Time Monitor (S8VS-

@@@

24B

@

)

Operation Mode

Undervoltage
detected

Total run
time

1,000-hour steps

*

1 to 

50  

to 150 ( 

×

 1000 h)

/

/

      Press 3 seconds or more or no key  
pressed for 30 seconds or more.

  o r

Press 3 seconds  
or more.

* Factory settings are in 
  

reverse type.

Models with Maintenance Forecast Monitor (S8VS-

@@@

24A

@

)

Models with Total Run Time Monitor (S8VS-

@@@

24B

@

)

Operation Mode

Undervoltage
detected

Maintenance
forecast

18.5 to 

20.0  

to 27.5 (V)

0.1-V steps

* Factory settings are in reverse 
  

type.

*

0.5-year steps

*

0.0 to 

0.5

to 5.0 (y)

/

/

      Press 3 seconds or more or no key  
pressed for 30 seconds or more.

or

Press 3 seconds  
or more.

18.5 to 

20.0  

to 27.5 (V)

0.1-V steps

*