No.17S138-00
37/58
STC-MBS881U3V / STC-MCS881U3V / STC-MBS122BU3V / STC-MCS122BU3V
Product Specifications and Use’s Guide
9.2
Pixel Format
The image format from camera can be set on the Pixel Format.
GenICam Parameters
PixelFormat
IEnumeration Type
Pixel Format
The following chart shows the available Pixel Formats on the camera:
Output Bit
Pixel Format
Monochrome Camera
Color Camera
8bits
Mono8
BayerRG8
10bits
Mono10
BayerRG10
10bits Packed
Mono10p
BayerRG10p
12bits
Mono12
BayerRG12
12bits Packed
Mono12p
BayerRG12p
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
9.3
Decimation
When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
GenICam Parameters
DecimationHorizontal Integer Type
Sets decimation on horizontal direction
1: Disable Decimation, 2: Decimate one of two pixels
DecimationVertical
Integer Type
Sets decimation on vertical direction
1: Disable Decimation, 2: Decimate one of two pixels
(*) Binning and Decimation function cannot be use simultaneously.
Decimation X(Off), Y(Off)
Decimation X(Off), Y(On)
Decimation X(On), Y(Off)
Decimation X(On), Y(On)
Decimation X(Off), Y(Off)
Decimation X(Off), Y(On)
Decimation X(On), Y(Off)
Decimation X(On), Y(On)