40
Section
2
Installation and
Reading
V400-R1CF/R1CS
User’s Manual
Section 2
Introduction Procedure
Installation and Reading
This section explains how to install the reader and conduct a final check to confirm that the
reader works successfully in the actual environment.
Installation
Installing the reader
Install the reader at a distance where it captures the code correctly.
Field of view and distance in relation to the code
For information about the installation distance and code resolution, refer to “Reading range
performance” on p.26.
Installing the mounting bracket
To avoid regular reflection of illumination light, install the bracket at an angle of about
15 to 30 against the bar code.
The mounting bracket supplied with the reader can be tilted between -30
°
and +30
°
.
Use this mounting bracket.
(Tightening torque: 0.54 N
·
m)
1.
Attach the mounting bracket to the reader (4-M3 screws
×
4).
4-M3 screw
Mounting bracket
