21
RFID System
User's Manual
Section 1
Names
and Fun
ct
io
ns of
Compo
n
ent
s
Section 1
Product Overview
Operation Indicator (LED)
After the operation indicator is lit or flashing for a certain time, it will turn OFF.
Activate Switch
When button commands or commands with button communications specifi-
cations (button trigger or button auto) are used and the activate switch is
pressed, communications with the RF Tag will start. (For details on button
communications specifications, refer to
)
If the activate switch is pressed with the Hand-held Reader/Writer in the ini-
tialization stand-by mode (with the green indicator flashing), the function
settings will be initialized.
Reset Button
Press this button for two seconds or more when the power is first turned ON
to put the Hand-held Reader/Writer into the initialization stand-by mode.
Serial Interface Connector
This is a serial interface with an RS-232C-compliant D-Sub 9-pin connector.
Antenna
To communicate with the RF Tag, move the antenna closer to it.
Display
Meaning
Lit green
A command has been received from the host device.
Communications with the RF Tag have completed normally.
Flashing green
•
When the power is turned ON, after initialization of the Hand-held
Reader/Writer is completed.
•
When the power is turned ON and the reset button is pressed for
two seconds or more (initialization stand-by mode).
Communications with the RF Tag are in progress.
Lit red
A communications error with the RF Tag has occurred.
A CPU error has occurred.
Flashing red
An RF Tag non-existent error has occurred.
A communications error with the host device has occurred.
Antenna
Operation indicator (LED)
Activate switch
Serial interface
connector
Reset button
