82
Section 3
V6
80
C
o
mm
an
d
s
RFID System
User's Manual
Section 3
Commands
End Codes
End codes are given in 2-digit hexadecimal.
Note:
Vertical parity errors, framing errors, and overrun errors do not occur for the V680-CHUD.
For details on each error, refer to
Status
End code
Meaning
Normal
00
Normal completion
Host communications error
10 (See note.)
Vertical parity error
11 (See note.)
Framing error
12 (See note.)
Overrun error
14
Format error
15
Execution status error
18
Frame length error
Lower communications error
70
RF Tag communications error
71
Mismatch error
72
RF Tag non-existent error
76
Error end code for the DATA CHECK command or OVERWRITE COUNT CON-
TROL command (verification error or overwrite count exceeded) or error for
READ WITH ERROR CORRECTION or DATA CHECK command
77
Warning for READ WITH ERROR CORRECTION or DATA CHECK command
79
RF Tag error
7A
Address error
7C
Antenna error
7D
Write protection error
Memory error
93
Internal memory error
