Omron Walking styleX, Instruction Manual

10

9 Reset function

9.1 Resetting the weekly target

Reset the weekly target if you want to change the day from 
which the weekly target starts.

1

Press 

 repeatedly untill the Target display is selected.

2

Press 

 for at least 2 seconds.

• If no buttons are pressed for more than 10 seconds or 

any button other than 

 is pressed, the display will 

return to the Target display.

3

After “Clr” flashes on the display, press 

to reset the Target.

Note:

Even if the Target display is reset, the Ex 
quantity for the day (from 0:00 until the Target 
display is reset) is not reset. If the Target 
display is reset, the weekly target will have the 
Ex quantity for the day deducted from it.

■

About the Week’s total Ex quantity in memory

(Refer to Chapter 7.1)

If the Target display is reset, the Week’s total Ex quantity in 
memory will change since it is recalculated based on the day 
before the Target display is reset.

9.2 Resetting the Trip steps data

Reset the trip steps data if you want to change the day from 
which the (your) trip starts.

1

Press 

 repeatedly untill the Trip steps display is 

selected.

2

Press 

 for at least 2 seconds.

• If no buttons are pressed for more than 10 seconds or 

any button other than 

 is pressed, the display will 

return to the Trip steps display.

3

After “Clr” flashes on the display, press 

to reset the Trip step data.

HJ-304-E_EN-FR-DE-IT.book  Page 10  Tuesday, August 5, 2008  11:46 AM